IP63 Digital Device To Block Mobile Phone Signal Isolator Remote
Monitoring
Especially for prisons and other large sensitive locations such as
military or governmental compounds.
It can also use in Oil and Gas Storage Facilities and fields,
Security Services, Military Units, Secret Services, Museums,
Facotry, Border Patrol and Drug Enforcement, Customs, etc. – Remote
PC control with software to Turn on each jammer, each band or the
whole jammer system ON/OFF, VSWR Alarm in a wireless setup (RF
module). Each unit offers a key lock support & mounting hardware.
Digital noise technology jamming range is very high, 5 times
stronger than VCO technology jammer.
Digital Gaussian white noise is essentially a pseudo random signal,
signal characteristics consistent with a random function. Strong
Anti-interference ability, there is no need high power interference
radiation power, influence and damage to the electromagnetic
environment is very small, can bear long distance loss. Long-term
cases, interference stability. Mechanism causes due to
interference, interference by external environment (such as wind,
rain, ice, variations on space) change is not obvious.
The Prison Jammer GW-J800DNW manages the problem of illegal cell phones in a Prison or
Government facility. Prison Solutions from government stop smuggled
phones from making calls by using RF Jammers.
Our solutions are good at operation and design. Prison Jammers work
to block off large areas in a building to stop cell phone calls.
These Prison Jammers are installed in a pre-determined pattern.
Using digital Gaussian white noise technology for Maximum performance. Will cut-off all Cellular Communication
between Mobile Phones and Cellular cells.
The Jamming Radius depends on the strength of the signal in given
area. All Cellular Mobile Devices will be totally BLOCKED, and will
not be able to receive or dial outgoing calls. the cell phone
display will show "NO SERVICE".
Technical Specification,
| Output interface | Description | Shield band of frequency | RF output power( +1dBm) |
| CH1 | GSM850 | 851-894 MHz | 46dBm |
| CH2 | AWS 1700 | 2110-2155 MHz | 46dBm |
| CH3 | GSM900 | 925-960 MHz | 46dBm |
| CH4 | PCS 1900 | 1930-1990 MHz | 46dBm |
| CH5 | WIFI, 2.4G | 2400-2485 MHz | 43dBm |
| CH6 | LTE 2300 | 2300 - 2400MHz | 46dBm |
| CH7 | CDMA450 | 460 - 470 MHz | 46dBm |
| CH8 | LTE700 | 758 - 803 MHz | 46dBm |
| Power supply: AC220V, or 110V |
| Total Output Power: 300Watt |
| Power consumption:1000Watt |
| Weight: 65Kg Size(length × wind × high):720×490×240mm |
| Humidity: 5%-95% Running Temperature: -20℃ to +55℃ |
| Cooling System | Systematic Smart Cooling System |
| System Protection | VSWR, temperature |
| Jamming Source | Digital Gaussian white noise technology |
| Antenna Type | High Gain Directional Panel Antennas |
| Number of Antennas | 3 |
Jamming range: 100-600m according to signal density of mobile
network |
Mobile Phone Signal There are 3 types RF Jammers.
1. VCO(voltage controlled oscillator) Technology
2. DDS (Direct Digital Synthesis)Technology
3. Pseudo random digital Gaussian white noise technology.
General speaking,
1. VCO(voltage controlled oscillator) Technology
Requirements for the jamming range is not high, extremely sensitive
civilian consumption levels of low cost, but efficiencies are not
very strict scene.
2. DDS (Direct Digital Synthesis)Technology
Requirements for the jammer need wideband frequency range, and
choose different frequency range, such as 20-3000MHz NO gap
jamming.
3. Pseudo random digital Gaussian white noise technology.
Requirements for the jamming range is very high, can accept high
cost, national security and military, have strict requirements for
jamming range.
Mobile Phone Signal Features:
- High-power multi-band jammer, make high jamming range
- Modular construction for easy maintenance, repair and upgrade.
- Max 300watts total RF output power.
- Special additional housing for all weather protection.
- The general design of the system meets military requirements.
- Different frequency band can be controlled independently by single
switches;
- Power Amplifiers protection design ensures the working reliability
of the device.
- (Optional)Can customize these frequencies AM, FM, VHF, UHF, 450MHz,
iDEN, CDMA, GSM, GPRS, DCS, PCS, AWS, WCDMA, LTE 700, LTE 800, LTE
2300, LTE 2600, GPS, WIFI, WIMAX, etc.
Mobile Phone Signal Advantages:
1. VSWR protection,
When there be antenna disconnect, full system will not burn out.
2. Waterproof Level: IP63
Good cooling system, Continuous operation, even in hot climates.
3. Stable capability, cost-effective choice
4. Each channel can be controlled separately and simultaneously.
Manual adjustable output power with each channel.
allow the total blockade without interference of the people who
live outside the perimeter of the prison.
5. Remote Monitoring(Optional)
Remote Monitoring available by Ethernet Network
Remote Control Interface: RJ45
Provide a system (software and hardware) that allows the
authorities to supervise the operation at 100% of the blocking
system.
6. Small influence to the electromagnetic environment.
Comply with the maximum power allowed for non-ionizing radiations
that affect the health of people.
Mobile Phone Signal Application
Prisons, military, government, Oil and Gas Storage Facilities and
fields, Churches, Theatres, News Conference Rooms, Libraries,
Museums, Courts, Border Patrol and Drug Enforcement, Customs,
mosques, etc.
